Roland EGX-20 User Manual Download

Page: 2 / 52

For the USA

FEDERAL COMMUNICATIONS COMMIS-

SION RADIO FREQUENCY INTERFERENCE

STATEMENT

NOTE:

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated

in a commercial environment.

This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Unauthorized changes or modification to this system can void

the users authority to operate this equipment.

Use only I/O cables that have been designed and manufac-

tured specifically for this device.

For Canada

NOTICE

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe A respecte toutes les

exigences du Règlement sur le matériel brouilleur du Ca-

nada.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.

For EU Countries

Manufacturer:
ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The authorized representative in the EU:

Roland DG Corporation, German Office Halskestrasse 7, 47877 Willich, Germany

For California

WARNING

This product contains chemicals known to cause cancer,

birth defects and other reproductive harm.

RolandDG Corp. has licensed the MMP technology from the TPL Group.

Summary of Contents for EGX-20





















































Search results

Summary of Contents for EGX-20

Reviews:

Related manuals for EGX-20

Brands by name

Popular brands

Roland EGX-20, User Manual

Search results

Summary of Contents for EGX-20

Reviews:

Related manuals for EGX-20

Brands by name

Popular brands