30
•
Press the
button. “ECO” or “AUTO” starts flashing. Press either the
or
button until
“Obst” starts to flash on the screen.
•
Press the
button to confirm and start the OVERBOOST operating mode.
•
To exit the procedure: press the
button without changing the mode.
10.4.6. Temperature programming for ECO operating mode (SP1)
To set the temperature for ECONOMY mode:
•
Make sure that the keypad is not locked and that no other advanced procedure is in progress.
•
Press and release the
button. “SP1” will appear on the screen. Press and release the
button again. The compressor indicator light
starts flashing.
•
Press either the
or
button within 15 seconds to set the temperature. The parameters
r3, r4 and r5 will be visible.
•
Press and release the
button, or do not carry out any other operation for 15 seconds. The
compressor indicator light
will disappear. Press and release the
button.
•
To exit the procedure before completion, do not carry out any operation for 15 seconds (all
changes made will be saved).
10.4.7. Temperature programming for AUTOMATIC operating mode (SP2)
•
Make sure that the keypad is not locked and that no other advanced procedure is in progress.
•
Press and release the
button. “SP1” will appear on the screen. Press either the
or
button until “SP2” appears on the screen.
•
Press and release the
button again. The compressor indicator light
starts flashing.
•
Press either the
or
button within 15 seconds to set the temperature. The parameters
r1, r2 and r5 will be visible.
•
Press and release the
button, or do not carry out any other operation for 15 seconds. The
compressor indicator light
will disappear. Press and release the
button.
•
To exit the procedure before completion, do not carry out any operation for 15 seconds (all
changes made will be saved).
10.4.8. Viewing the operation status
To view the current operating status:
•
Make sure that the keypad is not locked and that no other advanced procedure is in progress.
•
Press the
button . Either Auto, ECO, Obst or Anti will appear on the screen within 3 sec-
onds depending on the current active operating state.
10.5. Advanced management
The following instructions are reserved for specialised technical assistance personnel.
Summary of Contents for Dalis 200DHW4
Page 46: ......
