Rointe Dalis 200DHW4, Instruction Manual

Page: 6 / 48

6
6. Technical information
6.1. Construction characteristics
1 Heat pump 1.6 Kw
2 Control panel
3 ABS casing
4
Steel tank (water heater) enamelled according to EN
standards (capacity: 200 / 260 litres)
5 Upper probe
6 Lower probe
7 Refrigerant recharge
8 Air recirculation fan
9 Throttle valve with double capillary tube
10
High-efficiency finned evaporator coil. Volume of
liquid deposited is regulated by a thermostatic valve.
11 Air inlet (160 mm)
12 Air outlet (160 mm)
13 Hermetically-sealed rotary compressor
14 Replaceable magnesium anode
15 Electric heating element
16 Condensation pump discharge line
17 Condensation return
18 Replaceable magnesium anode
19 Hot water outlet connection joint (G 1”)
20 Recirculation mounting (G ¾”)
21
Input coil for solar thermal power system
(G 1”1/4; 1 m
2
exchange surface)
22 Condensatation discharge pipe (G 1/2”)
23
Ouput coil for solar thermal power system
(G 1”1/4; 1 m
2 surface)
24 Cold water inlet connection joint (G 1”)
25 50 mm polyurethane insulation
26 ½”G fitting for probe immersion sleeve
27 Pressure and temperature relief valve G1/2”
Description
Unit of
measure
Dalis
200DHW4
Dalis
200DHWI4
Dalis
260DHW4
Dalis
260DHWI4
Thermal power yield kW 1.6
Total thermal power kW 3.1
Heating time (1) h:m 07:16 09:44
Heating time in BOOST mode (1) h:m 03:48 04:57
Thermal losses (2) W 105 76
Dimensions (diameter x height x depth) mm 650 x 1,714 x 600 650 x 2,004 x 600
Ø mm 650 650