Rointe Dalis 200DHW4, Instruction Manual

Page: 26 / 48

26
10.2. Display screen
10.2.1. Display screen information
Symbol Item Description
Compressor LED
If this is lit, the compressor is active.
If this is flashing:
- The compressor start-up procedure is in progress.
- The modification of the operating set points is in progress.
Defrost LED If this is lit, defrosting is in progress.
MF LED If this is lit, the electric heating element is active.
Fan LED If this is lit, the fan is active.
Maintenance LED If this is lit, maintenance of the air filter is required (if present).
Alarm LED
If this is lit, check the list of alarms and follow the procedure indicated in this
manual.
ºCelsius LED If this is lit, the temperature will be measured in degrees (ºC).
ºFahrenheit LED If this is lit, the temperature will be measured in fahrenheit (ºF).
ON / Stand-by LED
If this is lit, the product is in stand-by mode.
If this is flashing, the product has been switched on/off manually during a
switching on/off period in a certain time slot.
n/a Not used
Loc
The keyboard is locked.
dEFr
The defrosting procedure is in progress and it is NOT possible to enable any other function.
Anti
The anti-legionella function cycle is in progress.
ObSt
The overboost function is active.
ECO
The economy function is active.
Auto
The automatic function is active.
10.3. Operating modes
• AUTOMATIC mode
This mode mainly uses the renewable energy of the heat pump. As a support measure the electric
heating elements can be enabled and are activated if the water temperature is below a certain level,
or in the event where a temperature exceeding 62°C is required.