29
DALIS
Digital electric unvented heat pump
•
Press either the
or
button within 15 seconds to select “1” (the first switch on / off time)
or “2” (the second switch on / off time).
•
Press and release the
button or do not carry out any other operation for 15 seconds.
•
To exit the procedure before its completion: do not carry out any operation for 15 seconds or
press the button
and then release it.
•
When programming becomes active, the
symbol will flash. Carefully evaluate enabling of
time slot operation in order to avoid malfunctions caused by users.
10.4.4. Lock / unlock the keypad
To lock the keypad:
•
Make sure that no other advanced procedure is in progress.
•
Press the
and
buttons together for 1 second. “Lock” will appear on the screen.
•
If the keypad is locked, it will not be possible to carry out any kind of operation on the control
panel. If you press a key, “Lock” will appear on the screen.
To unlock the keypad:
•
Press the
and
buttons together for 1 second. “UnL” will appear on the screen and you
can use the keypad again.
10.4.5. Changing the operating mode
AUTOMATIC mode
To start the AUTOMATIC mode manually:
•
Make sure that the keypad is not locked and that no other advanced procedure is in progress.
•
Press the
button. “Auto” starts flashing.
•
Press the
button to confirm and start the automatic operating mode.
•
To exit the procedure: press the
button without changing the mode.
ECONOMY mode
To start the ECONOMY mode manually:
•
Make sure that the keypad is not locked, that no other advanced procedure is in progress and
that the equipment is not in OVERBOOST mode.
•
Press the
button. “ECO” starts flashing. Press the
button to confirm and start the ECO
operating mode.
•
To exit the procedure: press the
button without changing the mode.
OVERBOOST mode
To start the OVERBOOST mode manually:
•
Make sure that the keypad is not locked and that no other advanced procedure is in progress.
Summary of Contents for Dalis 200DHW4
Page 46: ......
