Operating the Instrument
R&S
®
RTE
78
Getting Started 1326.1026.02 ─ 06
By default, the diagram name contains the diagram number and the short names
of the waveforms shown inside. To change the diagram name, touch and hold the
tab name. The on-screen keyboard opens to enter the new name. Names must
be unique.
To arrange the diagrams on the screen, the Rohde & Schwarz SmartGrid function
helps you to find the target place simply and quickly. A tabbed view is also possi-
ble, and you can adjust the diagram size.
For details, see
"To arrange a waveform using the SmartGrid"
Grid (2)
The grid shows the vertical and horizontal divisions. The division lines are labeled
with the correspondent values. The grid labels have the color of the waveform to
which they belong. If several waveforms are shown in one diagram, the grid has
the color of the selected waveform.
Signal bar (3)
The signal bar is the control center for all enabled waveforms. On the top, the
horizontal and trigger labels show the main timebase and trigger settings. If you
tap a label, the relevant dialog box opens with the tab used at last.
Figure 5-2: Horizontal and trigger label on top of the signal bar
1 = Resolution
2 = Record length
3 = Timebase, horizontal scale
4 = Horizontal position
5 = Sample rate
6 = RT - real time, IT - interpolated time
7 = Trigger mode
8 = Trigger type, slope, and source
9 = Trigger level
Touchscreen Display