Instrument Tour
R&S
®
RTE
33
Getting Started 1326.1026.02 ─ 06
TRIGGER
Opens and closes the "Trigger" dialog box, where you can:
●
Select a trigger type and configure it.
●
Set general trigger parameters and control the acquisition run.
●
Configure a sequence of subsequent trigger events.
LEVELS
The rotary knob sets the trigger level for all trigger types. Turn clockwise to move
up the trigger level. If the selected trigger type requires two trigger levels - upper
and lower level - press the knob to toggle between the two levels.
SOURCE
Opens a dialog box where you can select the trigger source. Press the key again
to switch the source. The key lights up in the color of the selected trigger source.
SLOPE
Toggles the trigger slope or trigger polarity, dependent on the trigger type. The
current setting is shown on the trigger label, which is in the upper part of the sig-
nal bar on the touchscreen.
MODE
Toggles the trigger mode between Auto and Normal. The current setting is shown
on the trigger label.
RUN CONT
Starts and stops the continuous acquisition. A green light indicates a running
acquisition. A red light shows that acquisition is stopped.
RUN N× SINGLE
Starts a defined number of acquisition cycles. A green light indicates running
acquisition. A red light shows that acquisition is stopped. To set the number of
acquisitions, press the TRIGGER key, select the "Ctrl/Action" tab, and set "Aver-
age count (N-single count)". Press the key again to stop running acquisitions.
3.3.5
ANALYSIS Keys
The keys in the ANALYSIS functional block provide direct access to measure-
ment and analyzing functions. If you press CURSOR, ZOOM or MEAS, the oper-
ation starts on first keypress, and a second keypress opens the corresponding
dialog box. If you press another function key, the dialog box opens.
Keys and Controls
