Trying Out the Instrument
R&S
®
RTE
41
Getting Started 1326.1026.02 ─ 06
8. Tap the "Undo" icon on the toolbar repeatedly until the trigger mode is "Auto"
and the trigger source is "CH1".
9. Press the SLOPE key to toggle the trigger slope.
Watch the waveform and the "Trigger" settings.
4.2
Acquiring Data
You can acquire data using different arithmetic methods to get envelope or aver-
age waveforms.
If you need to change only one setting during analysis, and you need to change it
often, you can reduce the dialog box to a small box that only contains the
required setting. Thus you can change the setting and see the result immediately.
1. Press the ACQUISITION key on the front panel, in the HORIZONTAL area.
2. In the "Acquisition" tab of the "Horizontal" dialog box, select the "Decimation"
type
Sample
.
3. Tap the "Arithmetic" button for C1 to set the focus on this setting.
4. Tap the "Minimize" icon in the upper right corner of the dialog box.
Acquiring Data
