Preparing for Use
R&S
®
RTE
20
Getting Started 1326.1026.02 ─ 06
1. Check the input type of the monitor or projector. Make sure to select the cor-
rect cable. To use a VGA monitor, you need an active DVI-D to VGA adapter.
2. Press the SETUP key.
3. Select the "System" tab.
4. Tap "Display / Monitors".
5. To show the instrument's display content only on the external monitor, select
"Projector only".
To show the instrument's display content on both the oscilloscope and the
external monitor, select "Duplicate".
The touchscreen of the R&S
RTE has a screen resolution of 1024 x 768 pixel.
Most external monitors have a higher screen resolution. If the screen resolution of
the monitor is set higher than the instrument's resolution, the application window
uses a 1024 x 768 area of the monitor display. For full screen display, adjust the
monitor's screen resolution using "Additional display settings".
Connecting External Devices
