Trying Out the Instrument
R&S
®
RTE
52
Getting Started 1326.1026.02 ─ 06
12. Tap "Play".
The currently displayed waveform is indicated in the "Current acq." field.
13. Close the "History" dialog box so you can see the waveform better.
14. Tap "Running" to stop the display.
During running display, the "Play" is labeled "Running".
15. Close the quick access "History" dialog box.
The history mode is disabled. The HISTORY key is no longer illuminated.
4.6
Showing Basic Measurement Results
Using the R&S
RTE you can perform and display different measurements simul-
taneously. The color of the results in the result table corresponds with the source
waveform color.
4.6.1
Performing a Cursor Measurement
1. Restore the default signal channel settings: Press the PRESET and
AUTOSET keys.
2. Tap the "Cursor" icon on the toolbar.
3. Tap the diagram in which you want to set the cursors.
Alternatively, draw a rectangle on the screen to position the cursor lines.
The cursor lines appear in the diagram and the "Cursor Results" box opens.
The measured values of the waveform at the cursor positions are displayed.
4. You can move the cursor lines in different ways:
● Touch a cursor line and drag it on the screen.
● Tap a cursor line to activate it. Turn the NAVIGATION knob to adjust the
position.
● Enter the position values in the result box.
Showing Basic Measurement Results
