Operating the Instrument
R&S
®
RTE
99
Getting Started 1326.1026.02 ─ 06
4. For result boxes of automatic measurements, also the "docked" default posi-
tion is available. In docked position, the result table is placed always below
the diagram: "Meas" menu > "Gate/Display" > "Default" position.
To adjust the font size in result boxes
1. Press the SETUP key.
2. Select the "Screen" tab.
3. Set the "Result dialog font size".
5.8
Using Dialog Boxes
All functionality is provided in dialog boxes as known from computer programs.
You can control the instrument intuitively with the touchscreen. This section pro-
vides an overview of the accessing methods and describes how to use the dialog
boxes.
Each dialog box has four icons in the upper right corner:
Go back: opens the previously opened dialog box.
Go forward: opens the next dialog box.
Minimizes the dialog box to a small box that only contains the last selected func-
tion.
Closes the dialog box.
For direct access to important control and measurement functions use the
toolbar, see
To open a dialog box
► Perform one of the following actions:
● Tap the required menu, and then the menu entry.
● Press the function key on the front panel.
Using Dialog Boxes
