Preparing for Use
R&S
®
RTE
19
Getting Started 1326.1026.02 ─ 06
Connecting a USB flash drive or CD-ROM drive
If installation of a USB flash drive or CD-ROM drive is successful, Windows
informs you that the device is ready to use. The device is made available as a
new drive ("D:") and is displayed under Windows Explorer. The name of the drive
depends on the manufacturer.
Connecting a keyboard
The keyboard is detected automatically when it is connected. The default input
language is English – US.
Use the Windows "Start" menu > "Control Panel" > "Change keyboards or other
input methods" to configure the keyboard properties.
Connecting a mouse
The mouse is detected automatically when it is connected.
Use the Windows "Start" menu > "Devices and Printers" > "Mouse" to configure
the mouse properties.
Connecting a printer
When printing a file, the instrument checks whether a printer is connected and
turned on, and whether the appropriate printer driver is installed. If necessary,
printer driver installation is initiated using the Windows' "Add a Printer" wizard.
Use the Windows "Start" menu > "Devices and Printers" > "Add a printer" to
install the driver.
2.4.2
Connecting an External Monitor
You can connect an external monitor or projector to the R&S
RTE. The following
connectors are available:
●
Before connecting an external monitor, ensure that the monitor and the R&S
RTE
are connected to a ground contact. Otherwise the instrument can be damaged.
After connecting an additional monitor or projector to the instrument, configure it
for usage. The relevant settings are Windows settings but you can configure the
displays directly in the instrument setup.
Connecting External Devices
