Rohde & Schwarz CMW-B400B, User Manual

Page: 31 / 97

GUI Reference
R&S
®
CMW-B400B/-B405A
31 User Manual 1176.8116.02 ─ 04
Fig. 4-5: General analog measurement settings
Coupled with ................................................................................................................. 31
Routing ..........................................................................................................................31
Repetition ...................................................................................................................... 31
Stop Condition ...............................................................................................................32
Statistic Counter ............................................................................................................32
Input Settings ................................................................................................................ 32
└ Path Coupling ................................................................................................. 32
└ Auto Ranging, Maximum Level ....................................................................... 32
Coupled with
Displays the coupling of the measurement to a generator. The measurement can be
used standalone ("Off") or it can be coupled to an analog or digital generator.
The coupling is configured within the generator settings, see "Analyzer Coupling"
on page 41.
Remote command:
n/a
Routing
Displays the input connector for the measured analog audio signal (AF 1 IN or AF 2
IN). This setting is not configurable.
Remote command:
n/a
Repetition
Defines how often the measurement is repeated if it is not stopped explicitly or by a
failed limit check.
●
Continuous: The measurement is continued until it is explicitly terminated; the
results are periodically updated.
●
Single-Shot: The measurement is stopped after one statistics cycle.
Audio Measurement Settings
深圳德标仪器
135-1095-0799