Rohde & Schwarz 1157.3458.02, Operating Manual, Page: 47 / 80

R&S FSH-K1 Command Description
1157.3564.12 41 E-8
MEAS (Measurement Mode)
This command defines the measurement mode.
Value Measurement
0 Off
1 Analyzer
2 Tracking Generator (Model 13, 23 and 26)
3 Power Sensor
4 Channel Power
5 Occupied Bandwidth
6 TDMA Power
7 Distance to Fault (R&S FSH-B1)
8 Receiver Mode (R&S FSH-K3)
9 Carrier / Noise
10 Isotropic Antenna
11 WCDMA BTS CDP
Using the value 0 the instrument can turned off if the power adapter is connected. If the instrument is
OFF it can be turned on programmatically by selecting one of the measurement modes.
Example:
set<cr>
0<cr>
meas,4<cr>
‘selects channel power measurement
0<cr>
‘responds parameter ok
TRD1 (Transducer)
This command selects a transducer. To turn a transducer off, use the string ‘NONE’:
Example:
set<cr>
0<cr>
trd1,hl223<cr>
‘selects transducer table “HL223”
0<cr>
‘responds parameter ok
Example 2:
set<cr>
0<cr>
trd1,none<cr>
‘de-activates any transducer
0<cr>
‘responds parameter ok
TRD1X (Transducer X – dBµV/m)
This command selects an X-direction transducer (dBµV/m only) for the Isotropic Antenna
measurement. To turn a transducer off, use the string ‘NONE’:
Example:
set<cr>
0<cr>
trd1x,ts-emf-x<cr>
‘selects transducer table “TS-EMF-X”
0<cr>
‘responds parameter ok
Example 2:
set<cr>
0<cr>
trd1x,none<cr>
‘de-activates any transducer
0<cr>
‘responds parameter ok