Command Description
R&S FSH-K1
1157.3564.12 38
E-8
MARKTOLVL (Marker Level To Reference Level)
This command sets the current or corresponding marker level as reference level.
Optional Value
Marker
1…6 Marker
1…6
Example:
cmd<cr>
0<cr>
marktolvl<cr>
‘set marker level to reference level
0<cr>
‘responds parameter ok
Example 2:
cmd<cr>
0<cr>
marktolvl,4<cr>
‘set multi marker 4 level to reference level
0<cr>
‘responds parameter ok
MARKMODE (Marker Mode)
This command defines the marker mode.
Value
Marker Mode
0
Normal
1
Noise
2
Frequency Count
3
Multimarker
Example:
set<cr>
0<cr>
markmode,2<cr>
‘turns on frequency count
0<cr>
‘responds parameter ok
MARKDEMOD (Marker Demodulation)
This command defines the marker demodulation mode.
Value
Demodulation
0
OFF
1
AM
2
FM
Example:
set<cr>
0<cr>
markdemod,2<cr>
‘turns
on
FM
demodulation
0<cr>
‘responds parameter ok
MARKTIME (Marker Demodulation Time)
This command defines the demodulation time at the current marker position. The demodulation time
range is 0.1 sec to 500 sec.
Example:
set<cr>
0<cr>
marktime,2.5<cr>
‘set demod time at marker position to 2.5 sec
0<cr>
‘responds parameter ok