Rohde & Schwarz 1157.3458.02, Operating Manual, Page: 32 / 80

Command Description R&S FSH-K1
1157.3564.12 26 E-8
Trace Settings
Command Parameters Unit Comment
TRACEMODE 0..4
WRAPPHASE 0,1
TRACEDET 0...6
TRACEAVG 2…999
TRACE <numeric value>,.... GET command only
TRACEBIN <value>,... GET command only
TRACETOMEM CMD command only
CCORRTRACE <numeric value>,.... GET command only
CCORRTRACEBIN <value>,... GET command only
CTRACE <numeric value>,.... GET command only
CTRACEBIN <value>,... GET command only
MATHMODE <numeric value>
MTRACE <string> GET command only
MTRACEBIN <string> GET command only
TRACEMODE
This command defines the trace mode.
Value Trace Mode
0 Clear Write
1 Average
2 Max Hold
3 Min Hold
4 View
Example:
set<cr>
0<cr>
tracemode,2<cr>
‘set trace mode to “Max Hold”
0<cr>
‘responds parameter ok
WRAPPHASE (Phase Wrapping)
This command defines the phase wrapping.
Value Phase Wrapping
0 Unwrap
1 Wrap
Example:
set<cr>
0<cr>
wrapphase
,0<cr>
‘set wrap phase to unwrap
0<cr>
‘responds parameter ok
Note: This command is available in Tracking Genarator only with measurement modes Smith Chart,
Phase or Vector Magnitude active.