Rockwell Automation Allen-Bradley DriveLogix 5730, User Manual

Page: 179 / 209

Communicating with Devices on a DH485 Link 9-7
Connections Using Belden 3106 Cable
The table and schematic diagram below shows wire/terminal connections
for Belden 3106A cable.
Connections Using Belden 9842 Cable
The table and schematic diagram below shows wire/terminal connections
for Belden 9842 cable.
For this Wire/Pair Connect this Wire To this Terminal
white/orange orange with white stripe 5 - Data A)
white with orange stripe 4 - (Data B)
blue blue 3 - (Common)
shield/drain non-jacketed 2 - Shield
For this Wire/Pair Connect this Wire To this Terminal
white/orange orange with white stripe 5 - (Data A)
white with orange stripe 4 - (Data B)
blue/white white with blue stripe cut back - no connection
(1)
(1)
To prevent confusion when installing the communication cable, cut back the white with blue stripe wire
immediately after the insulation jacket is removed. This wire is not used by DH-485.
blue with white stripe 3 - (Common)
shield/drain non-jacketed 2 - Shield
Termination
Data A
Data B
Common
Shield
Chassis Ground
WH/OR
OR/WH
BU
6
5
4
3
2
1
ahw0604.eps
Termination
Data A
Data B
Common
Shield
Chassis Ground
WH/OR
OR/WH
6
5
4
3
2
1
WH/BU
BU/WH
ahw0609.eps