Roche CoaguChek XS Pro Operator'S Manual Download

Page: 23 / 156

The CoaguChek XS Pro Meter •

2.2

Buttons and icons overview

The buttons and icons that appear during normal opera-

tion are shown here, along with their respective mean-

ings. Error messages and the description of the icons

linked to them are provided in a separate chapter. See

“Troubleshooting” starting on page 135.

Button/Icon

Meaning

Go to Main Menu

OK; save setting

Cancel; discard setting

Return (to previous menu)

Reduce/increase the value displayed.

Scroll through lists that are too long to be displayed all at once.
Inactive button:

Value cannot be further decreased/increased or:

End of list in this direction is reached
List of tests of a specific patient

Print after test result or from memory

Add a comment

Operator must wait until the meter has completed an action

Insert test strip

Remove test strip

Apply sample (the time left to apply sample is counted down in the

display)

180 SEC

Summary of Contents for CoaguChek XS Pro





























































































































































Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands

Roche CoaguChek XS Pro, Operator'S Manual

Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands