Roche CoaguChek XS Pro Operator'S Manual Download Page 149

Page: 149 / 156

Appendix •

149

Operator:

Touch

Patient Test

Perform the patient test as usual. Once the test is com-

pleted, the observer has to complete the next steps.

Hand the meter back to the observer.

Observer:

Touch

to log in again.

After you enter your password, touch

to pro-

ceed with the assessment.

Assess the operator’s performance by touching

Pass

Fail

Assess the test result by touching

Accept

Reject

Touch

to add a comment.

Touch

to return to the

Pat. Test - OTS

screen.

The OTS information is saved together with the test result.

Pat. Test - OTS

09:15 am

04/19/2012

Observer Login

Patient Test

OTS enabled

Remove

09:15 am

04/19/2012

Observer Login

Observer ALAN SMITHEE,

please log in to proceed.

Otherwise the OTS test will

not be complete.

I-010

Observer

09:15 am

04/19/2012

Fail

Accept

Pass

Reject

OTS passed:

Measurement Result OK?

Comment:

Summary of Contents for CoaguChek XS Pro





























































































































































Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands

Roche CoaguChek XS Pro, Operator'S Manual

Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands