Roche CoaguChek XS Pro, Operator'S Manual

Page: 116 / 156

8
• Extended Functionalities
116
■
The Patient ID is set to “hidden” (only possible with
a data management system), and there is a list
available:
When you start the test, the screen is blank and
Scan is displayed.
– You may now scan a Patient ID using the barcode
scanner. If the patient ID is on the list, the test will
proceed. If the patient ID is not on the list, you will
get an error message.
Patient list validation Depending on DMS settings, you have the following
options for patient list validation when working with
Patient lists:
■
A Patient ID does not have to be on the list to be
used (only valid for validation mode “off”).
■
The meter displays a notification if the Patient ID
entered is not on the list and validation mode
“notify” was selected in the DMS.
■
The meter displays an error message if the ID was
not found on the list of valid Patient IDs and valida-
tion mode “required” was selected in the DMS. To
proceed with the test, you must scan (if ID set to
“hidden”) or select (if ID set to Required) a valid
Patient ID.
■
If the “list” feature is set to be hidden, only Patient
IDs which are part of the patient list (previously
transferred from the DMS to the meter) can be
selected. It is not possible to add new Patient IDs
via scanner or keypad.
Note that the scanned Patient ID must already be on the
list that is sent from the DMS to the meter. You cannot
use the scanner to scan and enter a new Patient ID if
the
Patient ID
is set to “hidden”.