Roche CoaguChek XS Pro Operator'S Manual Download Page 68

Page: 68 / 156

• Meter Setup

Select the triggers, based on lot and/or time, for

requiring a quality control test.

You may select from the following options:

■

New Code Yes/No

(applies every time a new test

strip lot is used)

The general intervals are:

■

Daily

■

Weekly

■

Monthly

Touch the button with the option of choice when

changing the test strip lot.

Touch the button to select the interval of choice.

Your selection is now highlighted.

Touch to save this setting, or touch to exit

this menu without saving any changes.

For every option except for

, you must now indi-

cate the number of levels in which the quality con-

trol must be performed.

Touch to save this setting, or touch to exit

this menu without saving any changes. The display

automatically returns to the previous screen.

QC Lockout

09:15 am

04/19/2012

New Code

Yes

Daily

Weekly

Monthly

QC Lockout

09:15 am

04/19/2012

One Level

Two Levels

Number of Levels

Summary of Contents for CoaguChek XS Pro





























































































































































Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands

Roche CoaguChek XS Pro, Operator'S Manual

Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands