Roche CoaguChek XS Pro Operator'S Manual Download Page 47

Page: 47 / 156

Meter Setup •

The current setting is highlighted. You may select from

the following sort options:

■

Date/Time

■

Patient ID

■

Patient Name

Touch the button to select the

Sort by

option of

choice. Your selection is now highlighted.

Touch to save this setting, or touch to exit

this menu without saving any changes. The display

automatically returns to the previous screen.

The sort option

Patient Name

is available only when

used together with a patient list. Patient lists can only be

created with a DMS. For more details see “Data han-

dling”, starting on page 111.

Sort

09:15 am

04/19/2012

Date / Time

Patient ID

Sort By:

Patient Name

Summary of Contents for CoaguChek XS Pro





























































































































































Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands

Roche CoaguChek XS Pro, Operator'S Manual

Search results

Summary of Contents for CoaguChek XS Pro

Reviews:

Related manuals for CoaguChek XS Pro

Brands by name

Popular brands