Roche CoaguChek XS Pro, Operator'S Manual

Page: 115 / 156

Extended Functionalities •
8
115
Patient lists When starting a Patient Test, there will be the option of
either selecting a Patient ID from a patient list, entering
the
Patient ID
using the onscreen keypad or, if available,
of scanning the barcode with the Patient ID . The Patient
ID , if entered on the DMS, comes with an additional iden-
tification entry. Up to 20 characters can be used and
assigned as a second confirmation (e.g., name, date of
birth).
There are four possible configurations for a Patient ID
input:
■
The
Patient ID
is set to
Optional
or
Required
, and
there is no list available:
A Patient ID can be entered manually via the
onscreen keypad or read in via a barcode scan. The
Patient ID is stored with the test result.
■
The Patient ID is set to No , but there is a list
available:
The list of Patient IDs is always shown when
starting a test. You may now
– select a patient from the list;
– scan a
Patient ID using the barcode scanner;
– create a new patient entry by touching
New
.
Instead of an ID a consecutive number will be
assigned to this result.
■
The Patient ID is set to Optional or Required , and
there is a list available:
The list of Patient IDs is always shown when start-
ing a measurement. You may now
– select a patient from the list;
– scan a
Patient ID using the barcode scanner;
– create a new patient entry by touching New . You
may either read the ID using the barcode scanner
or enter a new ID via the onscreen keypad.