Roche CoaguCheck Pro II, Operator'S Manual

Page: 69 / 188

Meter Setup •
3
69
Parameter Selection When performing a test, the meter can be set to display a
screen that allows the operator to select the test parame-
ter to be used. Otherwise the meter will determine the
test parameter by reading the test strip (barcode) infor-
mation from the inserted test strip.
1 From the Main Menu , touch Setup to open the
meter settings.
2 From the Setup Menu , touch
Options
.
3 From the Options menu, touch Parameter
Selection.
4 Touch
Enable
to display the parameter selection
screen prior to each test or touch
Disable
to have
the meter select the parameter by reading the test
strip information.
5 Touch to save this setting, or touch to exit
this menu without saving any changes.
Options
09:15 am
05/29/2015
Auto Off
Connection
Beeper
Sort
Parameter Selection
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient Test
Select Param.
09:15 am
05/29/2015
Enable
Disable