2.1.1. Risk assessment and final application
The Robotiq Hand-E Gripper is meant to be used on industrial and collaborative robots. The robot, the Gripper and any other
equipment used in the final application must be evaluated via a thorough risk assessment. It is the robot integrator's duty to ensure that
all local safety measures and regulations are met. Depending on the application, there may be risks that require additional
protection/ safety measures; for example, the work-piece the Gripper is manipulating might be inherently dangerous to the operator.
For more information or details on the procedures, please refer to the eBooks available on our website
or contact our
technical support.
2.1.2. Intended Use
For the Hand-E Gripper
The Gripper unit is designed for gripping and temporarily securing or holding objects.
Info
Always comply with local and/ or national laws, regulations and directives on automation safety and general machine safety.
The unit should be used exclusively within the range of its technical data. Any other use of the product is deemed improper and
unintended use. Robotiq will not be liable for any damages resulting from any improper or unintended use.
For the Finishing Copilot software
The Finishing Copilot was created to teach complex trajectories with only few information and edit this trajectory rapidly. It was also
designed to control the robot so it applies a constant force onto a surface during the sanding or polishing process.
14
