Robitronic Overloader 2, Instruction Manual

Page: 5 / 32

Specification
5
Description Settings Step
specific for NiMH/NiCd
Charge mode Linear, Impulse, Reflex, Auto, 4-Step
Cells 1-12 1
deltaPeak/cell 1-30mV 1mV
Peak-Lock time 1-50min 1min
Trickle current Off, 10-400mA 10mA
1-6 cells - max 20,0A
7 cells - max 17,0A
8 cells - max 15,0A
9 cells - max 13,5A
10 cells - max 12,0A
11 cells - max 11,0A
12 cells - max 10,0A
Cutoff voltage/cell 0,5-1,2V 0,1V
Cycle mode Off, C->D, D->C, (D)C->D
Numbers of cycles 1-10 1
Cycle wait mode Time, Temperature
C->D Delay 1-240min 1min
D->C Delay 1-240min 1min
C->D temperature 20-70°C / 68-158°F 1°C / 1°F
D->C temperature 20-70°C / 68-158°F 1°C / 1°F
specific for LiPo
Charge mode CC-CV
Cells 1-4 1
Charge end voltage/cell 4,2V
1-2 cells - max 20,0A
3 cells - max 13,5A
4 cells - max 10,0A
Cutoff voltage/cell 2,7-3,7V 0,1V
specific for Lixx
Charge mode CC-CV
Cells 1-4 1
Charge end voltage/cell 3,3-4,3V 0,1V
1-2 cells - max 20,0A
3 cells - max 13,5A
4 cells - max 10,0A
Cutoff voltage/cell 2,0-3,7V 0,1V
specific for Pb
Charge mode CC-CV
Cells 1-6 1
Charge end voltage/cell 2,35V
1-3 cells - max 20,0A
4 cells - max 15,0A
5 cells - max 12,0A
6 cells - max 10,0A
Cutoff voltage/cell 1,8-2,3V 0,1V
Limits of discharge current
Limits of discharge current
Limits of discharge current
Limits of discharge current