background image

Introduction

Thank you for purchasing this high-end competition charger. 
This charger is a high performance computerized battery maintenance system.
Capable of charging, discharging, cycling and conditioning multiple rechargable
battery types, with very high output power, a customized display with expertly 
designed software and programming controls, the Overloader2 is easily one of
the smartest and most powerful R/C battery maintenance systems available!

NOTE:

 You will find a transparent protective plastic film on the front plate.

Please remove this film before the first usage.

- Perfect for electric cars, trucks, boats and planes
- Handling NiCd / NiMH / Li-Ion / Li-Po / Pb battery types
- Restart of charge and discharge after a loss ao power
- Symbol aided graphical screens
- Graphical display show charge, discharge and cycle curves
- Storing up to 10 different battery configurations
- Performs 1 - 10 cycles for NiCd / NiMH only, and stores capacity and voltage date
  for all 10 cycles
- Break-in electric motors ( 1.0 - 8.0 V, 10A constant) or operate commutator lathes
- Heat glow plugs for nitro engines
- Operate tire warmers
- Intuitive program menus and simple pushbutton control
- Intelligent cooling fan control system for better charge efficiency and extended charger life
- Language, LCD contrast, fan operation, temp scale and sound cues are fully adjustable
- Popups for information and warnings
- packaged in a red-colored rugged, extruded aluminium case

Special features

 

2

Summary of Contents for Overloader 2

































Reviews: