Robitronic Overloader 2, Instruction Manual

Page: 9 / 32

Discharge
Discharge in idle mode
you are here, if you have just switched
to discharge menu.
- Use and to select a suitable
profile (0-9) for your battery.
- The keys and changes the
discharge current with steps of 0.1A.
- The button starts discharging.
- Use the button to switch to
the profile settings.
profilenumber
battery type
average
voltage
est. discharge
time profilename
discharge
current set
capacity
removed
temperature
of battery
voltage of batt.
discharge time
cutoff-
voltage
cells/
nom. capacity
discharge
current act.
voltage of batt.
voltage
resolution
discharge time
scroll mode
time
resolution
Discharge in action
The battery symbol is animated and the
actual discharge current is shown.
- While discharging and do not
have any function.
- and keep on changing the
discharge current.
- The key switches to the
discharge graph view.
- Press and hold the button to
cancel discharging.
Discharge graph
shows the battery voltage against the
charge time
- Use and to zoom.
The number of seconds, one point
represents (s/p) is changed.
While changing the value is inverted.
Note that voltage resolution is auto-
matically set. The range of the
voltage-axis is shown in Volt.
- , and do not
have any function at the charge graph.
- Use to leave the charge graph.
battery
resistance
average
voltage
9
ENTER /
START
MODE /
CANCEL
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
ENTER /
START
MODE /
CANCEL