background image

Kickr ll™ User Manual

Technical Specifications

Configuration

1 Panel solar charger with regulated USB output

 Power

3.5 Watt photovoltaic unregulated,  

3.0 Watt, 

5 Volt System regulated

0.6 Amp output

Dimensions

Size 362mm x 190mm x 18mm

Weight: 227g (0.50lb)

Cautions and Warnings

• Avoid immersion in water. If water is splashed on the 

modules, dry them immediately with a dry cloth or towel.

• Avoid splashing water in or around the USB box area.  If 

exposed to water, immediately shake or blow water from 

the box.

• Do not bend or crease the modules 

• Avoid partially shading modules under load to prevent 

reduction in power.

• Artificially concentrated sunlight (i.e. with a magnifying 

glass or by other means) shall not be directed onto the 

modules.

• Do not cut, scratch, or puncture the modules, hinges, or 

end terminal.

• Do not stand on or walk on the modules or end terminal.

• Do not drop or allow objects to fall onto the modules, 

hinges, or end terminal.

• Do not attempt to open, or otherwise dismantle the USB 

box.

Apple™ Product Warning

When charging Apple™ consumer devices (i.e. iPods, 

IPhones, IPads, etc.), a time-out will occur when the Kickr 

does not receive direct sunlight onto its panels. This will 

result in an incompatibility message on your Apple™ 

product. To resume charging, please unplug and re-plug 

the unit into the Kickr.

What Can EnerPlex Kickr™ II Do?

The EnerPlex Kickr™ II can charge most devices that are 

USB enabled, such as smartphones. Below are some ex-

amples of average charge times for a variety of electronic 

devices. 

• Jumpr™ Mini 1,350 mAh battery ~ 4 hours

• Jumpr™ Stack 4,800 mAh battery ~ 4 hours

• iPhone 5- ~ 3 hours

• Samsung Galaxy S4- ~ 4 hours

• iPad Mini- ~ 9 hours

• Kindle Fire HD 7”-  ~9 hours

Getting Started

1.  Firmly connect the charging cord from the device you 

are charging into the USB port on the EnerPlex Kickr™ II.

2.  Place the unit you are charging in the provided pouch on 

the Kickr™ II.

3.  For best results, position and angle your EnerPlex 

Kickr™ II in a location where it will receive maximum 

exposure to the sun

4.  When finished charging, disconnect the charging cord 

from the USB port.

Other EnerPlex Gear: See the latest at  

www.goenerplex.com

Made in USA/China

Rev. 7-16-14

Reviews: