Robitronic Overloader 2, Instruction Manual

Page: 18 / 32

Tire heating control
Set-up tire heating control
This is where you are when you first enter
the tire heating control mode.
- The buttons and have no
function in this set-up of the tire
heating control.
- With and you are still able
to adjust the tire heating temperature
from 45°C to 70°C resp. 113°F to
158°F in 1° increments.
- The button starts the tire heating
process.
- PLEASE NOTE: the tire heating
control only functions when the
temperature sensor of the Overloader2
is activated and attached within the tire
heating electric blankets.
- With the button you will switch
from here into the display mode.
Real tire
temperature
Amperage
Set-up tire
heating
temperature
Real tire
temperature
Amperage
Heating
animation
Amperage
Visual
Display
During tire heating process
The “smoking” tire animation symbolizes the
running heating process. During the running
heating process both, the set-up tire temperature
and the actual real temperature are displayed.
The actual amperage is shown in graphic form
and in digital figures, also.
- With and buttons still can be used
to readjust the tire heating temperature.
- With the you can always stop the
heating process.
- The buttons , and have no
function during the tire heating process.
18
Set-up tire
temperature
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN ENTER /
START
_
MODE /
CANCEL
+
UP
ENTER /
START
MODE /
CANCEL