Robitronic Overloader 2, Instruction Manual

Page: 21 / 32

Adjustments
Language
- The following languages are available: English, Deutsch and French.
The language selection is effective within the complete system.
21
Temperature
- Temperatures can be displayed in °C or °F.
- PLEASE NOTE: by changing from one to the other ALL temperature readings
will be mathematically transferred and “rounding errors” might be possible.
Cooling fan
- Can be switched on AUTO (Automatic) or ON.
- In the ON position all 3 cooling fans are permanently running.
- In the position AUTO the fans are automatically switch on depending
on the load on the system.
Acoustical buttons
- Can be switched ON or OFF.
- Depending on the adjustment all button-use will be confirmed by
an acoustical sound.
Melody
- You can choose between 9 different melody settings.
- The melody will be played after each ending of a charge, discharge, cycle
or break-in process.
- With the button you can play the currently active melody.
Melody repeat duration
- Adjustments for repeat duration are possible from 1 to 10 times.
Graph resolution
- The following resolution steps are available: 1sec./point, 2s/P, 5s/P, 10s/P.
This means for the practical use, that the voltage is stored for graphical use
every second, every 2 seconds, every 5 seconds or every 10 seconds.
- Depending on the setting the all over record time can vary from
2h 16m 32s (1s/P setting) to a total of 22h 45m 20s (10s/P setting).
- PLEASE NOTE: that this adjustment has to be done
BEFORE any charge, discharge or cycle process.
- PLEASE NOTE: that by changing the graph resolution the
graphic storage of the system will be deleted.
Information acoustical sounds
- Can be switched ON or OFF.
- In the position OFF all sounds of the unit for the ending of processes are
turned off. This also includes all sounds due to errors and wrong user inputs.
ENTER /
START