Robitronic Overloader 2, Instruction Manual

Page: 8 / 32

Charge
Charge in idle mode
you are here, if you have just switched
to charge menu.
- Use and to select a suitable
profile (0-9) for your battery.
- The keys and changes the
charge current with steps of 0.1A.
- The button starts charging.
- Use the button to switch to
discharge menu.
profilenumber
battery type
charge mode
est. charge
time profilename
charge
current set
capacity
added
temperature
of battery
voltage of batt.
charge time
deltaPeak/
charge end
voltage
cells/
nom.capacity
charge
current act.
voltage of batt.
voltage
resolution
charge time
scroll mode
time
resolution
Charge in action
The battery symbol is animated and the
actual charge current is shown.
- While charging and do not
have any function.
- and keep on changing the
charge current.
- The key switches to the
charge graph view.
- Press and hold the button to
cancel charging.
Charge graph
shows the battery voltage against the
charge time
- Use and to zoom.
The number of seconds, one point
represents (s/p) is changed.
While changing the value is inverted.
Note that voltage resolution is auto-
matically set. The range of the
voltage-axis is shown in Volt.
- , and do not
have any function at the charge graph.
- Use to leave the charge graph.
peaklock
symbol
8
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
ENTER /
START
MODE /
CANCEL
ENTER /
START
MODE /
CANCEL