Robitronic Overloader 2, Instruction Manual

Page: 17 / 32

Glow plug heating
Set-up glow plug heating
This is where you are when you first enter
the nitro glow plug hetaing mode.
- The buttons and have no
function in this set-up of the glow
plug heating.
- With and you adjust the glow
plug heating voltage from 0.1V to 2.5V
in 0.1 increments.
- The button starts the plug
heating process.
- With the button you will switch
corresponding to the adjustment into
the tire heating or display mode.
real glow plug
voltage
amperage
On/Off
symbol
glow plug
voltage
amperage
glow plug
animation
amperage
visual
display
During glow plug heating
The glow plug animation symbolizes the
running heating process. When a glow plug
is connected to the system and it is correctly
functioning (no defect plug) it is displayed
with a glowing plug animation. Instead of
the adjusted glow plug heating voltage now
the REAL running voltage is displayed.
The actual amperage is shown in graphic
form and in digital figures, also.
- The and buttons still can be
used to readjust the glow plug heating
voltage.
- With you can always stop glow
plug heating process.
- The buttons , and have no
function during glow
plug heating process.
17
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
ENTER /
START
MODE /
CANCEL