RMG TME400-VC, Operating Manual

Page: 9 / 112

1 Introduction
MANUAL TME400-VCF · EN04 · 2019 March 26th
3
MessEG Measurement and Calibration Act
Law on the marketing and provision of measuring devices in the
market, their use and calibration, valid since 1/1/2015
MessEV Measurement and Calibration Regulation
Regulation on the marketing and provision of measuring devices in
the market and on their use and calibration; 12/11/2014
MID Measurement Instruments Directive
PTB Physikalisch-Technische Bundesanstalt [German National Test Au-
thority]
Vo o riginal meter reading ( V olume) of a mechanical counter
approx. approximately
max. maximum
min. minimum
1.2.2.
Symbols
The following symbols are used:
1, 2,
…
Identifies steps for work tasks
..
1.2.3.
Structure of notices
The following notices are used:
Danger
This warning notice informs you of imminently threatening dangers that can
arise due to misuse/operator error. If these situations are not avoided, death
or severe injuries can occur.