RMG TME400-VC, Operating Manual

Page: 51 / 112

3 TME400
MANUAL TME400-VCF · EN04 · 2019 March 26th
45
3.1.1.
Display test
The display test is provided to ensure that all fields of the display function properly.
For this purpose, please press and hold the up arrow and down arrow buttons (
and ) for more than 2 seconds. The following display appears while these but-
tons are held.
Figure 8: Display at display test
3.1.2.
Reset
To reset the system, the voltage supply is interrupted and the TME400 is switched off
for this period. For this purpose, the battery and any existing external voltage supply
are disconnected. The program and operating parameters are not lost in the process
and the meter statuses are saved.
3.1.3.
Booting up
It may be necessary to re-boot the device in case of severe faults.