RMG TME400-VC, Operating Manual

Page: 57 / 112

4 Operation
MANUAL TME400-VCF · EN04 · 2019 March 26th
51
V Q p/T Calc I/O Par Status Info
Figure 13: 8 columns of the coordinate system
With the cursor buttons (arrows)
◄ ▲ ▼ ►
OK
you can reach each value by gently pressing the desired button in this coordinate
system.
Keypad Description Effect
◄
Left arrow
Switches the column of the table from right to left
▲
Up arrow
Upward movement within the column of the table:
You move from the last value of the list towards the
first value.
This is also used to adjust numbers (counting up).
▼
Down arrow
Downward movement within the column of the table:
You move from the first value of the list towards the
last value.
This is used to adjust numbers (counting down).
►
Right arrow
Switches the column of the table from left to right
OK
Function
The following functions are triggered by pressing:
pressed < 2 seconds = display of the coordinate
pressed > 2 seconds = shows the coordinate
pressed > 2 seconds = switch to settings mode (see
below)