RMG TME400-VC, Operating Manual

Page: 24 / 112

1 Introduction
MANUAL TME400-VCF · EN04 · 2019 March 26th
18
According to PED 2014/68/EU
-20°C to +80°C (spheroidal graphite iron)
-40°C to +80°C (cast steel)
-40°C to +80°C (stainless steel)
-10°C to +80°C (welded version
and round steel material)
Pressure safety for DN25 according
to sound engineering practice, see
PED 2014/68/EU, sec. 4, subsec. 3 -40°C to +60°C (aluminum)
Lower temperature limits are available on request with the welded version and round steel material.
Note
If different temperature ranges apply simultaneously, the smallest specified
range applies for the overall system. This is also marked on the type plate.
Caution
Direct solar radiation must be avoided.
Danger
The temperature sensor must not be connected via the housing plug on the
meter in hazardous areas; a dedicated cable must be routed for the tempera-
ture sensor!
1.3.4.3.
Use of gas meters for different gases
Gas Symbol Tight-
ness at
0°C and
1.013 bar
Meter
housing Comments
Natural gas 0.8 Standard
City gas Standard
Methane CH
4
0.72 Standard
Ethane C
2
H
6
1.36 Standard