RITE-HITE FasTrax XL, Installation/Service/Owner'S Manual

Page: 35 / 92

Rite‑Hite
®
Installation/Service/Owner's Manual
FasTrax
®
XL
Publication: AMEN00316 2020-07-06 35
M
L
N K
14 Mount the hand lever/chain blocker assembly (J) at
a convenient height off the floor, ≈ 54in [1372mm]
to top of plate so the hand lever is easily accessed
Align with brake hand lever and chain hoist,
≈ 11-12in [305mm] from lower track to outside
mounting holes Use fasteners suitable to hold unit to
the wall ( Figure 52 on page 33 )
15 Install chain tensioner in line with hole in hand lever/
chain blocker assembly and at least 12in [305mm]
below the assembly so it does not interfere with
operation
16 Install the hand chain (Q) ( Figure 53 on page 34 )
onto the chain hoist, down through hole in hand lever/
chain blocker assembly and around chain tensioner
pulley The chain links can be taken apart to achieve
the length needed
17 Route the longer cable (O) ( Figure 52 on page 33 )
attached to the hand lever up through the larger hole
on the spring plate (N) (Figure 55)
18 Adjust the cable so that when the hand lever is down,
the assembly is fully engaged into the sprocket and
when the lever is up, the engagement assembly is not
touching the sprocket Tighten both cable clamps
19 With the hand lever completely down, pull the hand
chain to move the door Disengage the chain hoist
and confirm that the chain hoist and sprocket spin but
the door does not move
NOTE:
The door will not operate until the chain hoist
is installed and plugged in
20 Connect the switch cable to the cable coming out
of the control box conduit Secure wires away from
moving parts
21 Reset and run the door Confirm that the sprocket
and chain hoist do not turn when the door moves
With the door stopped, rotate the hand lever down
and confirm that the door operation is disabled by the
switch
22 Proceed to drive shroud installation on
"Figure 70"
on page 41
for attaching additional mounting
bracket Confirm that there is clearance for the cable
conduit and hand chain when using the chain hoist
Figure 55
INSTALLATION
N.P.O.
(OPTIONAL)
Continued