RITE-HITE FasTrax XL, Installation/Service/Owner'S Manual

Page: 32 / 92

FasTrax
®
XL
Installation/Service/Owner's Manual
Rite‑Hite
®
32 Publication: AMEN00316 2020-07-06
INSTALLATION
Non-Drive Side
Continued
U
R
D
H
9 Wrap the belt (R) 2 1/2 times around the
counterweight pulley (H) and route the belt over the
counterweight idler pulley (D) When adjustments are
made, there should be 1 1/2 pre-wraps remaining on
the pulley
10 Connect the counterweight sensor photoeye and
reversing photoeye cables to the terminal block
assembly (U)
V
W
W
11 Secure wires away from moving parts and sharp
edges
12 Install mounting brackets (V) with edges flush with
the edge of the lower track Secure to the wall using
anchors (W) See "Mounting Methods" on page
10 Space evenly from floor to jamb
Figure 50
Figure 51