RITE-HITE FasTrax XL, Installation/Service/Owner'S Manual

Page: 21 / 92

Rite‑Hite
®
Installation/Service/Owner's Manual
FasTrax
®
XL
Publication: AMEN00316 2020-07-06 21
INSTALLATION
Lower Track
Continued
J
K
12 Using the predrilled slots (J) in the lower track as
a guide, mark and drill a hole and place a fastener
in the center of the slot at the top, middle, bottom
and tighten Slot location will vary based on ordered
height
13 If the hole goes completely through the wall, use
through bolts and backer plates (K) to secure the
lower track to the wall Backer plates (if used)
must be clean and either painted or a non-ferrous
material Sleeves may be required if wall collapses
when tightening through bolt It is the responsibility of
the installer to ensure proper lower track spacing and
adequate method of fastening to the wall
14 After the door is installed and operational make sure
the curtain is not too tight or loose Place fasteners in
the remaining holes
NOTE:
All holes must be utilized to prevent lower track
movement
Figure 27
Figure 28