RITE-HITE FasTrax XL, Installation/Service/Owner'S Manual

Page: 15 / 92

Rite‑Hite
®
Installation/Service/Owner's Manual
FasTrax
®
XL
Publication: AMEN00316 2020-07-06 15
INSTALLATION
Lower Track Assembly
(STANDARD PROJECTION)
NOTE:
Unless noted, the lower track assembly procedure
applies to both the drive and non-drive sides
A
B
C
D
E
H
F
G
B
B
I
J
K
N
M
L
B
1 Install the rear bottom re-feed roller assembly (A)
on the lower track (B) using (3) 3/8in-16 x 3 1/2in
[M10 x 89mm] hex head machine screws (C) and (3)
3/8in-16 [M10] nylock nuts (D)
2 Assemble the header plate (E) and rear top re-feed
roller assembly (F) on the lower track (B) using (3)
3/8in-16 x 6in [M10 x 152mm] hex head machine
screws (G) and (3) 3/8in-16 [M10] nylock nuts (H)
3 Install the front bottom re-feed roller assembly (I)
on the lower track (B) using (3) 3/8in-16 x 3 1/2in
[M10 x 89mm] hex head machine screws (J) and
(3) 3/8in-16 [M10] nylock nuts (K)
4 Install the front top re-feed roller assembly (L)
on the lower track (B) using (3) 3/8in-16 x 6in
[M10 x 152mm] hex head machine screws (M) and
(3) 3/8in-16 [M10] nylock nuts (N)
Figure 12
Figure 13
Figure 14
Figure 15