RITE-HITE FasTrax XL, Installation/Service/Owner'S Manual

Page: 10 / 92

FasTrax
®
XL
Installation/Service/Owner's Manual
Rite‑Hite
®
10 Publication: AMEN00316 2020-07-06
INSTALLATION
Mounting Methods
Acceptable Anchor Types
These anchor types provide the necessary strength for
secure attachment of the unit to the building wall
Sleeve Anchor Hammer Anchor
F
F
Stud Anchor Wedge Anchor
F
F
F
= Length
Length of anchor should be long enough to engage
concrete structure by a minimum of 2in [51mm] Length
should be increased to allow anchor to extend through
any brick or aggregate fascia on exterior into concrete
structure a minimum of 2in [51mm]
Welding
Welding of the lower track is only possible with the
Extended Projection version (as the rear lower track is
steel) The Standard Projection lower track is aluminum
NOTE: If spaced incorrectly, welding in place offers no
adjustment of the lower tracks
Unacceptable Anchor Types
These anchor types are not strong enough for this
application and do not provide the ability to tightly secure
the unit to the building wall
Removable Zinc Alloy Split Drive Anchor
F
F
Zinc Alloy and Aluminum
w/Wide Head
Hollow Wall Anchor
(Molly Bolt)
F
F
Toggle Bolt Nylon w/Round Head
F
F
Conical Polyethylene Threaded Toggle Anchor
F
Expansion Anchor
F
= Length
F
Figure 4
Figure 3