Rioned CityJet, User Manual

Page: 65 / 98

OPERATION: EXTRA FUNCTIONS
65
Note:
If your machine is equipped with dry-running protection, you can always use the suction venturi. This is
because the dry-running protection always leaves some water in the water tank.
Starting suction:
> Connect the coupling of the filling hose to the coupling of the suction venturi.
> Place the strainer of the suction hose in the surface water.
> Check that the high pressure valve to the high pressure hose is closed.
> Start the machine.
> Switch on the high pressure pump, if necessary.
> Set the lever of the high pressure valve to ‘suction venturi’.
The water tank is now filled with surface water.
Stopping suction:
> Set the lever of the high pressure valve to the other position.
> Stop the machine.
> Disconnect the suction hose and put it away.
5.8 Eco mode e
5.8.1 Introduction
If the machine has an eco mode, it is always switched on as standard. The eco mode can only be used if
it is available and the engine is running.
There are two variants of the eco mode, which we will discuss separately below: Eco Start/Stop and Eco
Stop.
5.8.2 Switching eco mode on and off
1. Turn the navigation knob clockwise and move the navigation bullet to the eco
mode position:
2. Press the navigation knob to activate the eco mode: