Rioned CityJet, User Manual

Page: 47 / 98

OPERATION: STANDARD FUNCTIONS
47
• Then screw the spray gun onto the high pressure hose using the supplied spanners.
2. Unreel the high pressure hose ALL THE WAY.
3. Open the high pressure valve at the high pressure reel.
4. Start the engine if it has not yet been started.
4.5.3 Pressurizing the system
Pressurizing can be started in two ways: with the e and with the Riomote control.
Pressurizing with the e
1. Press the High pressure on/off button.
Pressurizing with the Riomote control
1. Press button 4 ‘Start spraying’ (9-channel) or button 4 ‘HP on’ (11-channel) to start spraying.
2. Press button 2 ‘Increase speed’ (9-channel) or button 6 ‘Throttle up’ (11-channel) to increase the
speed, or button 1 ‘Reduce speed’ (9-channel) or button 5 ‘Throttle down’ (11-channel) to reduce the
speed.
4.5.4 Starting spraying
Starting spraying with the spray gun
1. Turn the pressure regulator knob clockwise until the desired pressure is reached.
The set pressure can be read on the pressure gauge when the gun is spraying.
2. Squeeze the trigger of the spray gun to start spraying.
Release the trigger to stop spraying.
4.5.5 Depressurizing the system
The system can be depressurized in two ways: with the e and with the Riomote control.
Depressurizing the system with the e
2. Turn the navigation knob to increase (clockwise) or decrease (anticlockwise)
the speed:
1. Turn the navigation knob anticlockwise to reduce the speed:
Reduce the speed by turning the navigation knob on the eControl
anticlockwise:
2. Press the High pressure on/off button.
Pressure drops off.
3. Press and hold the Engine on/off button for at least one second.