OPERATION: STANDARD FUNCTIONS
44
•
screw the ‘Open nozzle’ onto the high pressure hose
2. Reel out the high pressure hose in one of the following ways:
•
with the hydraulic hose reel (see section ‘
Hydraulically reeling high pressure hose or
suction hose in/out
’)
•
with the e
(see section ‘
Reeling high pressure hose in/out with e
’)
•
manually (see section ‘
Manually reeling high pressure hose or suction hose in/out
’)
•
with the Riomote control (see section ‘
Reeling in/out with the Riomote control
’)
3. Place the spray nozzle in the pipe to be cleaned.
4. Open the high pressure valve at the high pressure reel manually.
5. Turn the pressure regulator knob completely open (clockwise).
6. Start the engine if it has not yet been started.
4.4.6 Starting spraying
Spraying can be started in two ways: with the e and with the Riomote control.
Starting spraying with the e
TAKE CARE!
Only switch on the high pressure at idling speed!
1. Press the High pressure on/off
button.
The water now sprays out of the nozzle at the end of the hose.
The LED for high pressure lights up blue:
The text ‘High Pressure ON’ is displayed for two seconds:
After five seconds, the home screen is displayed:
Summary of Contents for CityJet
