Rioned CityJet, User Manual

Page: 34 / 98

SAFETY
34
> waterproof workwear
> helmet
> spray boots with steel toes
3.16 Water discharge
Ensure that the water is drained off properly.
Clean the discharge water before discharging it into the sewer system in the following two
cases:
> when cleaning with harmful chemicals, or
> when the object to be cleaned is contaminated with environmentally harmful substances.
3.17 Other machine safety provisions
3.17.1 Introduction
In addition to the emergency stop, the machine has the following safety provisions. The
numbers after the provisions and their location can be found in the section ‘
Design and
principle of operation
’.
3.17.2 Pressure regulator
The pressure regulator ensures that the operating pressure never becomes too high and thus
acts as a safety valve.
3.17.3 Protective covers
Your machine is fitted with various protective covers and panels. It is forbidden to remove these
protective covers unless maintenance is to be carried out on the machine. You should then stop
the machine and let it cool down if necessary.
Protective covers and lockable panels must be locked when the machine is in use.
The locks may only be opened during maintenance and servicing by authorized personnel.