Rioned CityJet User Manual Download Page 21

Page: 21 / 98

DESCRIPTION AND PRINCIPLE OF OPERATION

Home

The second navigation bullet (Home

) is always visible. You can always navigate to it.

Pulsator, electric reel operation and hose counter

The following three navigation bullets represent:
>

the pulsator

the reel

the hose counter

These bullets are only visible when the relevant function is available on the machine. For example, you can
only see electric reel operation when this option is installed.

If a function is not available, the corresponding navigation bullet is not visible and you navigate to the next
bullet.

Eco mode

If the engine has an eco mode and that mode is active, the engine will stop after some time if you stop
spraying.

Management

The rightmost navigation bullet (Management

) is always visible, so you can always navigate to it.

Summary of Contents for CityJet



































































































Search results

Summary of Contents for CityJet

Reviews:

Related manuals for CityJet

Brands by name

Popular brands

Rioned CityJet, User Manual

Search results

Summary of Contents for CityJet

Reviews:

Related manuals for CityJet

Brands by name

Popular brands