Rioned CityJet, User Manual

Page: 63 / 98

OPERATION: EXTRA FUNCTIONS
63
5.5.4 Resetting hose counter to
0
metres
If you reset the hose counter to
0
metres, you can make a measurement from any point. Do this as follows:
1. Make sure the hose is completely rolled up.
2. Press the navigation knob.
3. Select Reset and press the navigation knob. The hose counter now shows
0
.
4. Select Back and press the navigation knob. You are now back on the home screen.
5.5.5 Switching between ‘metres’ and ‘feet’
The hose counter is set to ‘metres’ by default. You can switch between ‘metres’ and ‘feet’ as follows:
1. Select the management function (see section ‘
Management function e ’)
You are now back on the home screen. The hose counter is now set to ‘feet’ instead of ‘metres’.
2. Press the navigation knob:
3. Select Hose Counter and press the navigation knob.
4. Press the navigation knob again.
5. Select Counter Unit.
6. Press the navigation knob again. Counter Unit metre turns blue.
7. Turn the navigation knob and select ft.
8. Press the navigation knob.
9. Select Set.
10. Select Back.
NOTE
If you use the hose counter, you can no longer activate the home screen of the
e. The speed can then only be activated by briefly pressing the Engine on/
off button.