Rioned CityJet, User Manual

Page: 49 / 98

OPERATION: STANDARD FUNCTIONS
49
16. Press and hold the Engine on/off button on the e for at least one second:
The engine is now stopped.
The machine is now ready for departure.
Removing antifreeze
Complete the following procedure to remove the antifreeze from the lines:
1. Start the machine (see section ‘Starting the engine’).
2. Prepare a reservoir or jerrycan.
3. Pump all the antifreeze through the high pressure hose to the reservoir or jerrycan. The antifreeze can
then be used again next time.
4. Check that the antifreeze has not been diluted too much. If the antifreeze is diluted too much, the high
pressure section of the machine is not sufficiently protected against freezing.
5. If the antifreeze has been diluted too much, take it to your municipal recycling collection point for
disposal.
6. Stop the machine.
7. Prepare it for use (see section ‘Checks before departure’).
NOTE
When pumping out the water, there is no need to place a spray nozzle or spray gun
on the high pressure hose.