Page 13 of 88
General Installation Instructions
Please familiariz e yourself with the device and its operation and read this Operating Manual carefully.
Do not install any RockNet RN.300 device in a location subjected to excessive heat (such as direct
theatrical lighting or direct sunlight), dust or mechanic al vibration.
Unpacking
•
Save all the packing materials. They will prove valuable should it bec ome necessary to trans-
port or ship this product.
•
Please inspect the RockNet device carefully for any signs of damage incurred during transpor-
tation. It has undergone stringent quality control inspection and every possible effort has been
made to ensure that it left the factory in perfect condition.
•
If t he product shows any signs of damage, please notify the transportation company without
delay. Do not connect a damaged device to AC power outlets.
•
Only the consignee may institute a claim against the carrier for damage during transportation.
•
If necessary, contact your supplier or as a last resort, your local Media Numerics distributor,
dealer or agent, who will fully cooperate under such circumstances.
Installation
RockNet I/O devices (except RN.341.MY Yamaha interface cards) are designed for 19” rack mount
installation. Please mak e sure that common installation basics are taken care of:
•
Do not install any RockNet RN.300 device in a location subjected to excessive heat such as
direct theatrical lighting or direct sunlight
•
Make sure sufficient airflow is granted
•
Use RockNet devices in environmental temperature range between
0°C and 50°C or 32°F and 122°F
•
Do not place any items on top of the RockNet device
•
Do not place RockNet devices on uneven grounds
•
Protect RockNet devices from mechanical and electrical shock
•
Protect RockNet devices from mechanical vibration
•
Protect RockNet devices from moisture and liquidity impact of any kind
•
Protect RockNet devices from dust and dirt
USO
RESTRITO
